So what is it, Well NAND is the memory that we will be flashing Android to, instead of running from you're sd card or the RAM, both work ok but this time it will fully remove WinMo from you're device so you will basically have a Desire HD or Evo up-to you what you wanna class it as.
Ok so we start by heading to XDA forums you can click the title for this as I put a link there to get the guide on what to do.
So first of all we need to have HSPL on you're device if you havent then were have you been LOL. So we need MAGLDR you can get that from here. *HERE*
Download the Nand ROM you would like to use from ,*HERE* personally I use CMN [CyanogenMod_Nand]
NOTE1: If you dont have 1 or 2 on your phone then goto *THIS* thread for instructions on how to install HardSPL and update your Radio
NOTE2: You do NOT need to flash a Stock Rom before starting this, a Custom Rom will be fine as long as you have HardSPL 2.08 and a 576 RAM compatable Radio
NOTE3: If you are running Windows XP then you will not be able to right click and run the files as Administrator so just double click and run as normal
NOTE4: LEO512 and LEO1024 are both supported
NOTE5: MAGLDR doesn't replace OSPL/HSPL. It runs in the chain after. So it's safe to install and remove it
FLASH MAGLDR TO YOUR DEVICE
Ok so here we go, No pictures for this bit as I already have it, maybe I update it later and take screens for you, will see.
1. Synch Phone with PC in Windows Mobile!!! It has to be connected to activesync or WMDC via USB cable
NOTE: As an alternative method to activesync you can restart your phone in Bootloader Mode, then connect the usb cable and wait until 'usb' appears in the bottom half of your phones screen
2. Browse to the folder you extracted your Magldr Package files to on your pc, right click on ROMUpdateUtility.exe and select Run as Administrator
3. Tick the box to confirm you are aware of the risks and select 'Next'
4. Tick the box to confirm you have followed the preperation steps and select 'Next'
* The program will now check the usb connection *
5. Select 'Update'
6. Verify the image you will flash (it should say 2.00.000.0) and Select 'Next'
7. Read the process list and Select 'Next'
8. Your phone will enter BootLoader Mode and the progress will goto 100%
9. Your phone will now Reboot. Congrats, you just flashed MAGLDR.
FLASH YOUR ANDROID ROM
NOTE1: This section is only applicable AFTER you have flashed MAGLDR to your Device
NOTE2: Make sure your phone is still connected via usb cable before starting
* When your phone Reboots it will Enter the MAGLDR Boot Menu Screen *
1. Press the 'Volume Down' button to goto Option 4: USB Flasher and press the 'Call' button (far left of the 5 hardware buttons at the bottom)
2. The menu will enter Android Flasher mode and install usb drivers if not present
3. Browse to the folder you extracted your NAND Android Package files to on your pc, right click on Run DAF.exe (or Install.exe if DAF.exe isnt present) and select Run as Administrator
4. Read ALL the text and then select 'Next'
5. Read the information and select 'Next'
6. The installer will now detect USB and then flash your Android Rom to NAND
* You can follow this progress on your Phones Screen *
7. When flashing is complete your phone will Reboot and proceed to boot Android from NAND
*DISCLAIMER*
I take no responsibility for any fault or damage caused by any procedures within this guide. No warranties of any kind are given.
I will add pictures and more detail later today
No comments:
Post a Comment